LTE Rejection Notch Filter for removing intering frequencies (LTE 4G)

LTE Rejection Notch Filter for removing intering frequencies (LTE 4G)

OBF4LTE should be inserted into the input of the reception system before any amplifiers, active devices or receivers to exclude interfering signals from the whole network. Where the interfering signals are very strong, additional filtering may be necessary especially where it is received directly onto the coaxial cables / flyleads.

  • Four tuned filters for <45dB rejection of a single frequency.
  • Pre-tuned to 802MHz ~ 818MHz frequency centres for the rejection of LTE downlink frequencies
  • Fully screened outdoor / indoor housing with mast or bulkhead fixing
Model: OBF4LTE
Pass-Band: 5MHz ~ 790MHz
Stop-Band: 791MHz ~ 862MHz
Insertion Loss in Pass-Band: <0.5dB typical : Maximum <4dB at Pass-Band Edge (786MHz Ch60)
Maximum Insertion Loss in Stop-Band: >45dB typical up to 55dB
DC Pass: 12V 500mA
Connectors: F female
Housing: Fully Screened Metal Module in ABS weatherproof mast/bulkhead housing. Mast fixing ties included
Dimensions: 107 x 95 x 30mm
Weight: 0.200kg

Note: OBF4LTE is factory tuned for accuracy in frequency pass and stop-band rejection. Other bespoke filter frequencies are available. Please contact your aerial wholesaler or fill in our contact form.

Downloads

LTE Rejection Notch Filter

Specs

File File Type File Size Download Description
Obf4lte notch filter pdf 589.84 KB Download